  SXT10/SXT20
Small
mobile 40' or 70' tower
The
SXT 10 system is a very flexible real free fall tower, which
requires very little space and its set up within a few hours.
It consists of a 16 x 16 ft (5 x 5 m) SCAD net structure
and a small tower equipped with a staircase.
It can also
be set up without a tower to release riders into free fall
from any other 40 - 70 ft structure or building. It is the
perfect solution to enhance business of old ride towers.
Technical Data SXT10
Capacity/h: |
60 |
Height: |
40
ft / 12 m |
Operational
staff: |
2 |
Footprint: |
16x21ft
/5x7m |
|
 |
|
|
  SXT40
Scad
system for existing towers
This
set up is based on an existing towers, from which riders can be launched
into free fall.
The SCAD landing device is suspended from four small
tower structures (16,5 m / 55 ft), leaving free airspace between the
net and the release point. System includes winch system and small towers.
Technische Daten SXT40
Capacity/h: |
80 |
Height
: |
any
tower height |
Operational
staff: |
2 |
Footprint: |
43x43ft/13x13m |
|
|
|
|
  SD40
SCAD System Mobile
Unit
This system is completely dismantable and fits into
a minivan. It is especially designed for mobile operations and is installed
on mobile cranes. It can also be attached to any existing tower, building
or other structures.
Technical
Data SD40
Capacity/h: |
35 |
Height: |
141ft/43m |
Set
up/down: |
1h |
Operational
staff: |
3 |
Footprint: |
50x50ft/16x16m |
|
|
|
|
  SMT40
SCAD Mobile
Tower
This
mobile tower is equipped with a centrally lifted cabin. Up to 4 riders
enter the cabin on the ground to be lifted into release position.
It
is transported on a 40ft truck w/ small trailer and requires a mobile
crane and forklift for set up. It is designed for use at fairs and
seasonal seaside operations, that donīt allow fixed installations.
Technische Daten SMT40
Capacity/h: |
60-80 |
Height: |
141ft/43m |
Set
up/down: |
16h |
Operational
staff: |
3 |
Footprint: |
60x60ft/20x20m |
|
|
|
|
  SDT40
SCAD
Tower
This
is the light version of the SCAD tower, which operates a central rider
cabin in combination with the SCAD landing device.
Technische Daten SDT40
Capacity/h: |
40 |
Height: |
165ft/55m |
Operational
staff: |
2 |
Footprint: |
50x50ft/16x16m |
|
|
|
|
  SPT40
Sky Park Tower
This
tower is designed as multi-use structure, that has the stability to
accomodate not only the SCAD Dive, but other rides like slides, rotors
and swings, as well as a panoramic platform. It operates the SCAD independently
inside and is accessed by an external lift cabin.
Technische Daten SPT40
Capacity/h: |
80 |
Capacity
panoramic platform: |
25 |
Operational
staff: |
2 |
Footprint: |
50x50ft /16x16m |
|
|
|
|
  SMS
SCAD MEGA
SPLASH
By installing a shallow pool underneath the net, any
SCAD system can be converted into a wet ride.
After the net has soaked
up water in the pool and has been lifted back into position, 30 ft
off the ground, it produces a mega size splash upon landing, which
is thrilling and refreshing at the same time.
Technische Daten SMS
Capacity/h: |
n.a. |
Height: |
n.a. |
Set
up/down: |
0,5h |
Operational
staff: |
n.a. |
Footprint: |
36x36ft/12x12m |
|
|
|
|
SXT40
Scad system
for existing towers
This
set up is based on an existing towers, from which riders can be launched
into free fall. The SCAD landing device is suspended from four small
tower structures (16,5 m / 55 ft), leaving free airspace between
the net and the release point. System includes winch system and small
towers.
Technical
Data SXT40
Capacity/h: |
80 |
Height: |
any
tower height |
Operational
staff: |
2 |
Footprint: |
43x43ft/13x13m |
|
|
|
|
Attendents
and harnessing
 The
SCAD Dive requires only 2 staff for its operation.
The
ground controller instructs the riders how to put on the
easy to handle one-size harnesses. |
 The
special CFF (controlled free fall) harness is designed as
a 2 in 1 system, wich has an additional integrated safety
harness and guarantees the correct body position under
any circumstances. |
 The
2nd operator works at the top of the tower and connects the
rider to the release mechanism.
Upon a count down he pulls
the release and the rider starts a 100 ft free fall. |
 Back
on the ground the rider simply walks out of the landing net.
In
standing position the harness can be removed quickly by opening
two buckles. |
|
|
Alternative
towers
 MONTIC
also offers alternative tower models for any purpose. Pipe structures
are cost efficient and have great load capacities for extensive attachments,
such as bungee ramps, swing platforms etc.
Our internal CAD supported design department is ready to convert your wishes
into reality. Our product range includes all from custom made winch systems to
elevators and safety systems. |
|
 The
ride
 The
feeling of a SCAD dive is extraordinary and unusual. It is the
only thrill ride, that combines thrill with a maximum of comfort.
There are no distracting elements or uncomfortable impacts. |
|
Safety
  MONTIC
SCAD systems are built according to German safety standards and have
been tested and approved by the TÜV Germany. They also
comply with US ASTM standards.
It has also been inspected by the HSE-UK, DTI-Denmark, TÜV-Austria,
SA-Sweden, Lift Institute - Netherlands etc. and operates in 18
countries around the world including the USA and Japan. |
|
 |
